Then udevadm control udevadm ls -al /dev/cam* E161/E169/E620/E800 HSDPA ModemĬreate udev rule: # vi /etc/udev/rules.d/les Hey, I did it little bit different way and it's working with persistent path using udev rules.īus 001 Device 005: ID 12d1:1001 Huawei Technologies Co., Ltd. Wonder if a cron job could be done to update the device ID on a restart of the Host to solve this? Then I need to edit the "conf" file with the new device number and also allow permission to the Host with "chmod o+rw /dev/ttyACM0" again to get it working. But if I happen to shutdown or restart the Host for any reason the device number will change to something different. I followed the instructions above and my will bind with the CT just fine. If there are no new errors there the passthrough worked. Start the CT with the following command:.Here 002, 005 and 189 were taken from the previous outputs. Edit the following file, appending the following at the end.Now, by taking the Bus and Device from the previous output. Now connect device and list devices again, here my device is Bus 002 Device 005: ID 0c4b:0600 Reiner SCT Kartensysteme GmbH.īus 002 Device 005: ID 0c4b:0600 Reiner SCT Kartensysteme GmbH.Now, disconnect USB device from host and then:īus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubīus 002 Device 002: ID 80ee:0021 VirtualBox USB Tabletīus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub.Why is trying to do a ping with the other card ip? is this the problem? In my /etc/network/interfaces is defined first my ethernet card and next my usb adapter.A little bit more detailed version of the same:
But this ip is the static ip of my static network card wired.
I this card is not connected and I have the usb adapter conected, when I try to do a ping to anywhere I see that the messages are: From ip icmp_seq=1 Destination host unreacheable. I have see next: I have a wired network card configured with a static ip. In the nf I have the dns that my router assign and in /etc/network/interfaces I have a configuration like the documentation says for my adapter. Maybe the gateway is wrong? Because seems that the usb adapter is connected to the wifi.
I followed the instruction of wpa_supplicant instructions but doesn't works. Valid_lft 84785sec preferred_lft 84785sec Code: Select all 3: nameofmydevice: mtu 1500 qdisc mq state UP group default qlen 1000
0 kommentar(er)
